Launch X431 CR5001 OBD2 Scanner Engine Code Reader

Launch X431 CR5001 OBD2 Scanner Engine Code Reader ODB2 Car Diagnostic Tool Free Update Support full OBD2 Automotive Scanner

Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader
Launch X431 CR5001 OBD2 Scanner Engine Code Reader

Launch X431 CR5001 OBD2 Scanner Engine Code Reader ODB2 Car Diagnostic Tool Free Update OBD Automotive Scanner in Portuguese

Top reasons to choose Automotive Scanner Launch X431 Creader CR5001:

BASIC FUNCTIONS --- Engine system check. The obd2 scanner cr5001 can read and erase fault codes, view data stream and freeze frame, check I/M readiness and misfire. Also help you complete troubleshoot, turn off engine light, reset monitors and pass through smog check.
KNOW YOUR CAR --- With obd2 10 modes, this CR5001 has a general view on EVAP system, On-board monitor, O2 sensor, and running live data, let you know what parts and systems are failing, which gives you a full control of your vehicle.
STRONG DATABASE SUPPORT --- CR5001 built-in DTC look up, allow you to know the error code meaning without search online. With free update online from Launch website, you can approach the newest version software.
EASY TO OPERATE --- Everyone can use the tester easily. Built-in instructions allow beginners to start using immediately. Get power directly from obd2 interface, quick response, accurate test result, reliable quality. 

Launch X431 Obd2 Sacnner Creader CR5001 Support Multi-languages:

English, French, Spanish, Deutsch, Russian, Portuguese, Japanese
(Default language is English/French/Spanish. Please switch languages you need via update tool online.)
 

Launch X431 CR5001 OBD2 Scanner Support Functions:

  1. Read dynamic data streams and MIL
  2. Read readiness status
  3. Query freeze frame data
  4. Read current DTCs
  5. Clear DTCs
  6. O2 sensor test
  7. On-board monitor test(mode 6)
  8. Read pending DTCs
  9. Read vehicle information

Launch X431 Sacnner Creader CR5001 Supported Car Type

 
Support All OBD2 Gasoline, Diesel, Do not Support Electrical ,Hybrid Car.
 
American (USA) car
Compatible with Standard OBD2 Cars after 2001:
for Chrysler, for Ford, for GM, for Jeep
 
European car
Compatible with Standard OBD2 Cars after 2004:
(if you car is Opel in 2004, 2005, 2006, please ask us first)
for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for Fiat, for VW, for Ford, for Jaguar
for Skoda Superb after 2006
 
France Car
for Citroen, for Peugeot after 2006,
Not Support for Renault
 
Asian (Japanese/Korean) car
Compatible with Standard OBD2 Cars after 2005:
(if your car is in 2004 2005 2006 release , please ask us first)
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus , for Mazda, for Subaru, for Toyota
for Nissan after 2008
for Suzuki after 2012
Not support for Ssangyong
 
Chinese car:
Compatible with Standard OBD2 Cars after 2008:
for BYD, for Chery, for Geely, for Great Wall, for Karry
 
Note:
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.
Please Leave us message in below format, we will reply you within 8 hours.
for example : xx, 2005, 2.0cc, Diesel
 
Warning:
Not Support Russian Cars, VAZ,UAZ,LADA
Not works with Trucks, Pickups, Vans
 


Launch x431 CR5001 OBD Auto Code Reader Update Steps:

 
It support  free update of USB interface via internet
1. Log in the websit: http://en.cnlaunch.com/.
2. Search CR5001 then click.
3. Click Update Tools and download the flie.
4. When finished, double click the file icon and allow it run.
5.Connect this scanner to computer via USB cable, then click Device Upgrade.
6.Write down your email address and submit, and click Upgrade.
7.Please don't stop untill the upgrade is finished.

Customer Reviews